Ambient temperature RTD

Ambient temperature RTD sensor

These RTD sensors are designed to measure room temperature in industrial and farming premises, in offices and private housing.

They can also be installed on pipe surface or immersed for energy counting purposes.

Temperature range: - 50°C + 200°C, depending on the chosen model

Below models are proposed with platinum resistance as a standard (NF EN 60751 and IEC 751 standards). They can also be manufactured with NTC / PTC thermistor or with semiconductor.

___________________________________________________________________________________________

DSA3 Type for industrial premises, workshops, warehouses, stores, garages... ambient temperature from 0°C to+ 50°C

Sensing element
1 x PT100 at 0°C - PT500 - PT1000, class A or B
2 or 3 wires, 4 mm² max. section.

Box
self-extinguishing moulded material.

Wall mounting

___________________________________________________________________________________________

DSE2 Type for cold storage rooms up to - 20°C, or paired with an inside sensor for regulating inside temperature in private housing.

Sensing element
1 x PT100 - PT500 - PT1000, class A or B
2 or 3 wires, 4mm² max. section

Box
injected thermoplastic, IP 65 protection
PG7 cable gland

wall mounting

___________________________________________________________________________________________

DSA4 Type for industrial premises and offices. Ambient temperature from 0°C to 50°C.

Sensing element
1 x PT100 or 1 x PT1000 à 0°C, class A or B
2 or 3 wires, 2.5 mm² max. section

Box
moulded ABS
polycarbonate base

wall mounting

___________________________________________________________________________________________

DSA5 Type hor homes and offices, ambient temperature 0°C to50°C.

Sensing element
1 x PT1000 at 0°C
2 wires, class B

Box
moulded plastics
4-20mA transmitter

wall mounting

___________________________________________________________________________________________

CCET6 Type to be installed on heating pipes. Also used for counting energy: measures the temperature variation through paired sensors, according to customer specification. Temperatures from 0°C to +200°C

Sensing element
1 x PT100 - PT500 - PT1000 at 0°C, class A or B
2 or 3 wires, 2,5 mm² max. section

Box
light alloy tight box, IP43 protection , PG9 cable gland

304L SS, ø 6 mm protecting tube
fixed by welded or screwed thermowell

___________________________________________________________________________________________

CSTU type for heating pipes, fluid transportation, etc
temperatures from -50°C to +200°C

Sensing element
1 x PT100 or PT1000 at 0°C, class B
2 or 3 wires, 4 mm² max section

Box
light alloy, IP43 protection , PG9 cable gland

tightened by Serflex collar

Advice
Lagging is recommended to ensure better temperature measurement

___________________________________________________________________________________________

PS6 Type for heating pipes. Also used for energy counting : measures temperature variations through paired sensors, as per customer specifications.
Temperatures from 0°C to +200°C

Sensing element
1 x PT100 - PT500 - PT1000 at 0°C, class A or B

Extension
flexible cable with 3 0,22 mm² silicone insulated conductors

304L SS, ø 6 mm Protector
fixed by welded or screwed thermowell

___________________________________________________________________________________________

PSTU Type for heating pipes, fluid transportation, etc.
temperatures up to +200°C

Sensing element
1 x PT100 - PT500 - PT1000 at 0°C, class A or B
3 wires,

Light alloy base with reinforced SS outlet
Extension: flexible cable with 3 silicone insulated 0.22 mm² conductors,
tighened via bracket and Serflex collar

Advice
lagging is recommended for a better temperature measurement